1.被增壓介質是什么？
What is the pressurized medium?
氣動增壓泵分氣體增壓泵和液體增壓泵，空氣增壓泵，氣體增壓泵適合于潔凈的壓縮空氣、高純氣體的增壓，氣液增壓泵適用于水、液壓油、煤油等雜質較少、粘稠度低的液體，空氣增壓泵可以對空氣進行增壓。不同的介質要選用不同的密封件來確保壓力穩定，增壓迅速。
Pneumatic booster pumps are divided into gas booster pumps and liquid booster pumps, air booster pumps, gas booster pumps are suitable for boosting clean compressed air and high-purity gases, gas-liquid booster pumps are suitable for liquids with less impurities and low viscosity such as water, hydraulic oil, kerosene, etc. Air booster pumps can pressurize air. Different media require different sealing elements to ensure stable pressure and rapid pressurization.
2.使用場合？
2. Usage situation?
氣動增壓泵適合于高壓力、小流量的場合（瀚孚氣體增壓泵HFT能夠?qū)Φ蛪毫龊线M行增壓）適合于石油，科研、機械、檢測等場合、不太適用于民用及大流量輸出的場合。
Pneumatic booster pumps are suitable for high pressure and low flow situations (Hanfu gas booster pump HFT can boost pressure in low pressure situations), suitable for petroleum, scientific research, machinery, testing and other occasions, but not suitable for civilian and high flow output situations.
3.流量是多少？
3. What is the traffic?
氣體增壓泵的增壓中氣體分為標態流量和工作狀態的流量，一般大家都是說標態流量。（氣體增壓泵參數，液體增壓泵參數，空氣增壓泵參數）
In the pressurization of a gas booster pump, the gas is divided into standard state flow rate and working state flow rate, which is generally referred to as standard state flow rate. (Gas booster pump parameters, liquid booster pump parameters, air booster pump parameters)
4.被增壓介質的入口壓力是多少？
What is the inlet pressure of the pressurized medium?
氣液增壓泵一般對液體的入口壓力沒有要求，氣體增壓泵大部分都都要氣體有一定的預壓，預壓的大小會決定先用單級氣體增壓泵還是雙級氣體增壓泵。
Gas-liquid booster pumps generally have no requirement for the inlet pressure of the liquid. Most gas booster pumps require a certain pre pressure of the gas, and the size of the pre pressure will determine whether to use a single-stage gas booster pump or a two-stage gas booster pump first.
